Planuję napisać prostego klienta SSH w C/C++ dla projektu w mojej klasie intro networking. Mam jednak problem ze znalezieniem dobrej dokumentacji, jak to zrobić. Nie chcę rozbudowanej specyfikacji protokołu, tylko prosty przewodnik. Jakieś sugestie?Jak napisać prostego klienta SSH?
5
A
Odpowiedz
4
chciałbym przyjrzeć się libssl
i libcrypto
bibliotek, które są częścią OpenSSL project. W systemach opartych na Debianie można uzyskać biblioteki rozwojowe przy użyciu:
sudo apt-get install libssl-dev
chciałbym przyjrzeć plików pod /usr/share/doc/libssl-dev/demos
EDIT: Również można read the documentation here lub po zainstalowaniu, uruchom man ssl
2
Kroki:
- uzyskać poświadczenia istniejącego wystąpienia po stronie serwera
- zainstalować otwartym źródłach między klientami
- wykonać połączenie na linii poleceń
- tym na CLI, przełącznik dla szczegółowe dzienniki
- Skorzystaj z dzienników, aby wywnioskować komunikaty zwrotne (C/S) związane z uzyskaniem uwierzytelnionej sesji w implementacji szyfrów uzgodnionej przez obie strony.
stdout:
$ ssh -vvv myhost.com
OpenSSH_5.9p1, OpenSSL 0.9.8t 18 Jan 2012
debug1: Reading configuration data /home/myself/.ssh/config
debug2: ssh_connect: needpriv 0
debug1: Connecting to myhost.com [74.99.99.99] port 22.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/myself/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /home/myself/.ssh/id_rsa type 1
debug1: identity file /home/myself/.ssh/id_rsa-cert type -1
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/myself/.ssh/id_dsa" as a RSA1 public key
debug1: identity file /home/myself/.ssh/id_dsa type 2
debug1: identity file /home/myself/.ssh/id_dsa-cert type -1
debug1: identity file /home/myself/.ssh/id_ecdsa type -1
debug1: identity file /home/myself/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.5p1
debug1: match: OpenSSH_3.5p1 pat OpenSSH_3.*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_5.9
debug2: fd 3 setting O_NONBLOCK
debug3: load_hostkeys: loading entries for host "myhost.com" from file "/home/myself/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/myself/.ssh/known_hosts:12
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diff
ie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],ecdsa-sha2-nistp384-cert-v
[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-
sha2-nistp521,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij
[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rij
[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected]
enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected]
enssh.com,hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[email protected]
debug2: kex_parse_kexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour,aes192-cbc,aes256-cbc,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit: none,zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug2: dh_gen_key: priv key bits set: 124/256
debug2: bits set: 510/1024
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Server host key: RSA ac:24:92:03:fd:24:f8:01:a6:86:2a:bf:37:e9:a8:fe
debug3: load_hostkeys: loading entries for host "myhost.com" from file "/home/myself/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/myself/.ssh/known_hosts:12
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "74.99.99.99" from file "/home/myself/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/myself/.ssh/known_hosts:25
debug3: load_hostkeys: loaded 1 keys
debug1: Host 'myhost.com' is known and matches the RSA host key.
debug1: Found key in /home/myself/.ssh/known_hosts:12
debug2: bits set: 532/1024
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/myself/.ssh/id_rsa (0x800471d8)
debug2: key: /home/myself/.ssh/id_dsa (0x80048380)
debug2: key: /home/myself/.ssh/id_ecdsa (0x0)
debug3: input_userauth_banner
debug1: Authentications that can continue: publickey,password
debug3: start over, passed a different list publickey,password
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/myself/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Offering DSA public key: /home/myself/.ssh/id_dsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
debug1: Server accepts key: pkalg ssh-dss blen 433
debug2: input_userauth_pk_ok: fp 15:6c:78:1e:76:02:03:26:2e:53:1a:44:8e:59:97:b1
debug3: sign_and_send_pubkey: DSA 15:6c:78:1e:76:02:03:26:2e:53:1a:44:8e:59:97:b1
debug1: read PEM private key done: type DSA
debug1: Authentication succeeded (publickey).
Authenticated to myhost.com ([74.99.99.99]:22).
debug1: channel 0: new [client-session]
debug3: ssh_session2_open: channel_new: 0
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: client_session2_setup: id 0
debug2: fd 3 setting TCP_NODELAY
debug2: channel 0: request pty-req confirm 1
debug2: channel 0: request shell confirm 1
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel_input_status_confirm: type 99 id 0
debug2: PTY allocation request accepted on channel 0
debug2: channel 0: rcvd adjust 131072
debug2: channel_input_status_confirm: type 99 id 0
debug2: shell request accepted on channel 0
Powiązane problemy
- 1. Jak napisać test jednostki dla klienta sieciowego?
- 2. Apache CXF + Spring: Generowanie prostego klienta
- 3. Używanie Finlipsa do prostego klienta SOAP Scala
- 4. Jak korzystać z prostego klienta HTTP w systemie Android?
- 5. Ustawienie katalogu domowego klienta Git/SmartGit SSH
- 6. napisać skrypt do ssh do zdalnego komputera i wykonywać polecenia
- 7. Biorąc pod uwagę plik WSDL, utwórz prostego klienta Java
- 8. Rtęć przez klienta i serwer ssh na Windows
- 9. Pisanie prostego analizatora składni
- 10. Net :: SSH :: Perl korzystając przekazywane SSH klucz
- 11. Jak debugować tunel ssh
- 12. jak napisać edytor tekstu w C++
- 13. Jak sprawić, aby ssh zabił zdalny proces, gdy przerywam sam ssh?
- 14. pure python ssh
- 15. Docker Toolbox SSH Login
- 16. Jak napisać wysokiej wydajności klient sieciowy
- 17. Prosty tunel SSH w Javie
- 18. Przesyłanie portów SSH w pliku ~/.ssh/config?
- 19. Dane dla prostego TSP
- 20. preg_match_all do prostego tablicy
- 21. przekazywanie zmiennych przez ssh
- 22. C++: Jak napisać const_iterator?
- 23. Jak napisać Metody nieprzerwany
- 24. Jak napisać program międzyplatformowy?
- 25. Jak napisać maszynę wirtualną
- 26. Ruby: Jak napisać klejnot?
- 27. Jak napisać test jednostki?
- 28. jak napisać powrócić Haskell
- 29. jak napisać opis sposobu
- 30. Jak napisać proste Html.DropDownListFor()?
Skoro jest to projekt dotyczący prac domowych, czy możesz powiedzieć nam więcej o swoich ograniczeniach? Czy możesz na przykład użyć istniejącej biblioteki sieciowej, czy też musisz bezpośrednio wywoływać wywołania związane z gniazdami? –
Czy możesz korzystać z bibliotek? – sinelaw
Mogę to zrobić, ale moją pierwszą preferencją byłoby wywoływanie wywołań związanych bezpośrednio z gniazdem. Jeśli jednak wymagałoby to znacznie większej ilości pracy z mojej strony, z przyjemnością korzystam z bibliotek. – Groppe